Available Surgical Instruments and Equipment Range
Our product portfolio covers reusable instruments and equipment used across minimally invasive surgery, gynecology, urology, general surgery and related clinical procedures.
A hysteroscopy setup may include products for:
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Visualisation
- Access
- Diagnostic examination
- Operative access
- Fluid inflow and outflow
- Grasping
- Biopsy
- Cutting
- Monopolar electrosurgery
- Bipolar electrosurgery
- Light transmission
- Instrument protection and storage
- The required configuration depends on:
- Intended procedure
- Diagnostic or operative requirement
- Telescope diameter and viewing angle
- Sheath size
- Working-channel requirement
Electrosurgical generator
Final product selection must be approved by the authorised gynecologist, biomedical department and healthcare institution.
- Electrode connection
- Light-source compatibility
- Surgeon preference
- Hospital protocol
Diagnostic Hysteroscopy Instruments
A diagnostic hysteroscopy requirement may include a compatible telescope, diagnostic sheath, obturator, inflow or outflow connection and light cable.
- Before requesting a quotation, confirm:
- Telescope diameter
- Telescope length
- Viewing angle
- Diagnostic sheath size
- Obturator requirement
Inflow and outflow arrangement
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Light-post connection
- Light-source make and model
Required accessories
A diagnostic sheath should not be selected based only on its outside diameter or appearance. Compatibility with the telescope, obturator, locking mechanism and fluid connections must also be confirmed.
- Quantity
Operative Hysteroscopy Instruments
An operative hysteroscopy requirement may include a compatible telescope, operative sheath, working channel, bridge, inflow and outflow components, and procedure-specific instruments.
- The buyer should provide:
- Operative sheath size
- Working-channel dimensions
- Compatible telescope
- Bridge configuration
- Obturator requirement
Inflow and outflow arrangement
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Intended working instrument
- Electrode requirement
Existing equipment details
The exact included components should be itemised in the quotation. The expression “complete hysteroscopy set” should not be used unless every supplied component is clearly listed.
- Quantity
- Hysteroscopy Sheaths
- Important selection details include:
- Diagnostic or operative use
- Sheath diameter
- Working length
- Telescope compatibility
- Working-channel requirement
- Locking mechanism
- Inflow connection
- Outflow connection
- Obturator compatibility
- Existing system make and model
- Hysteroscopy Monopolar Electrodes
- When enquiring, specify:
- Required electrode pattern
- Electrode dimensions
- Compatible working element
- Compatible sheath
- Generator make and model
- Cable connector
- Existing electrode photograph
- Existing catalogue reference
- Hysteroscopy Bipolar Electrodes
- Provide:
- Cable and connector details
- Product reference, where available
Grasping, Biopsy and Mechanical Instruments
Where available for the required system, buyers may enquire about selected hysteroscopy-compatible instruments for approved grasping, biopsy, cutting or related requirements.
- Provide:
- Instrument type
- Working-channel size
- Working length
- Jaw or tip design
- Flexible or rigid requirement
- Sheath and bridge compatibility
- Existing system details
- Quantity
- Endoscopes for Hysteroscopy
- Important specifications include:
- Telescope diameter
- Telescope length
- Viewing angle
- Eyepiece configuration
- Light-post connection
- Sheath compatibility
- Existing camera compatibility
- Existing light-source compatibility
- Required quantity
- Fiber Optic Light Cables
- Confirm:
- Light-source manufacturer
- Light-source model
- Endoscope light-post connection
- Connector required at each end
- Cable diameter
- Cable length
- Existing cable photograph
- LED Light Sources
- Required application
- Existing endoscope or camera system
- Required output connection
- Light-cable connector
- Power requirement
- Installation location
Required accessories
The complete equipment configuration and included accessories should be confirmed in the quotation.
- Quantity
- Diagnostic vs Operative Hysteroscopy Requirements
- Monopolar and Bipolar Requirements Must Be Identified Clearly
- Check:
- Generator type
- Generator make and model
- Generator socket
- Cable connection
- Working-element design
- Electrode connection
- Sheath compatibility
- Telescope compatibility
- Fluid-management requirement
- Existing electrode reference
Hysteroscopy Instruments for Hospitals
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Hospitals and OBGYN departments can request quotations for:
- New diagnostic hysteroscopy setups
- Operative hysteroscopy requirements
- Replacement sheaths
- Replacement electrodes
- Replacement telescopes
Additional department instruments
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Teaching-hospital requirements
- Tender-based procurement
Compatible cables and accessories
Send the department-approved technical schedule, quantities, documentation requirements and delivery location.
- Applicable repair requirements
Hysteroscopy Instruments for Gynecologists and Clinics
Gynecologists, fertility centres and day-care surgery centres can enquire about individual products or compatible hysteroscopy components.
- If the product name is unknown, send:
- Complete product photograph
- Connection-end photograph
- Locking-mechanism photograph
- Working-end photograph
- Product diameter and length
- Existing product marking
- Telescope specification
- Sheath size
- Generator make and model
- Light-source details
- Required quantity
- Bulk Supply for Dealers and Distributors
Dealers and medical equipment distributors can enquire about:
Reusable surgical hand instruments and clinical equipment for operating room requirements.
- Hysteroscopy sheaths
- Diagnostic configurations
- Operative configurations
- Monopolar electrodes
- Bipolar electrodes
Endoscopes and accessories
Provide product-wise specifications, quantities, packaging requirements, documentation needs and delivery destination.
- Fiber optic light cables
- LED light sources
- Replacement components
- Hysteroscopy instrument requirements
- How to Submit a Replacement Requirement
- Product name
- Manufacturer or system brand
- System model
- Product or catalogue number
- Full product photograph
- Connection photographs
- Locking-mechanism photograph
- Product diameter
- Working length
- Telescope details
- Sheath details
- Monopolar or bipolar requirement
- Generator make and model
- Cable connector details
- Required quantity
- Pre-Use Inspection
- Inspection may cover:
- Surface cleanliness
- Channel cleanliness
- Sheath condition
- Telescope surface and image condition
- Light-post condition
- Locking mechanism
- Valve and stopcock movement
- Inflow and outflow connections
- Obturator fit
- Bridge attachment
- Working-instrument movement
- Electrode condition
- Insulation integrity
- Cable and connector condition
- Visible corrosion, bending or damage
Cleaning and Sterilization
Reusable hysteroscopy instruments can include narrow channels, valves, stopcocks, detachable parts and optical components. These features require product-specific cleaning, inspection and sterilization procedures.
- Point-of-use handling
- Safe transport to the reprocessing area
- Disassembly
- Thorough cleaning
- Channel and lumen flushing
- Rinsing
- Drying
- Optical inspection
- Reassembly
- Packaging
Validated sterilization
The healthcare facility remains responsible for applying its validated infection-control and reprocessing procedures.
- Protected storage
- Quality Management and Certification
- Repair and Service Evaluation
- Enquiries may involve:
- Damaged sheaths
- Valve or stopcock problems
- Locking-mechanism issues
- Telescope image problems
- Damaged light-post connections
- Electrode damage
- Connector problems
- Cable damage
- Working-instrument movement issues
- Physical bending or misalignment
- Information Required for a Quotation
- Include:
- Buyer or institution name
- OBGYN department or clinic
- City, state and country
- Diagnostic or operative requirement
- Product name
- Required quantity
- Sheath diameter
- Working length
- Telescope diameter and viewing angle
- Working-channel requirement
- Monopolar or bipolar requirement
- Generator make and model
- Cable connector
- Light-source make and model
- Existing system brand
- Reference photograph or catalogue number
- Required documentation
- Delivery location
- Expected delivery date
- GST or export billing details
- Why Choose Bharat Surgical?
- Diagnostic and Operative Requirements
- Monopolar and Bipolar Electrodes
- System-Based Product Identification
- Supply for Multiple Buyer Types
- ISO 13485:2016-Certified System
- Supply From Mumbai, India
