ISO 13485:2016 Certified
40+ Years of Excellence
600+ Products
Download Catalog
MANUFACTURER & SUPPLIER | B2B UROLOGY INSTRUMENTS

Cystoscopy Instruments
Manufacturer & Supplier in India

Bharat Surgical manufactures and supplies reusable cystoscopy instruments for hospitals, urology centres, medical colleges, surgical-equipment dealers and international distributors. The range includes cystoscope sheaths with obturators in multiple French sizes and compatible accessories for diagnostic and operative cystoscopy systems. A cystoscopy component should not be selected by size alone — the telescope diameter, viewing angle, working length, locking mechanism, sheath size, bridge, obturator, irrigation ports and instrument channel must be checked together before ordering.

Request B2B Quotation Send Requirement List
ISO 13485:2016 Certified
40+ Years Experience
Mumbai Warehousing
Cystoscopy Instruments surgical instrument on a clean clinical blue background
Product Range

Cystoscopy Instrument Range from Bharat Surgical

For professional healthcare use only. Cystoscopy instruments must be selected, prepared and used by qualified medical professionals according to the product's approved intended use and instructions for use.

The available or custom-quoted range may include:

Cystoscope sheaths
Cystoscope sheaths with obturators
Diagnostic cystoscope sheaths
Operative cystoscope sheaths
Single-flow cystoscope sheaths
Continuous-flow cystoscope sheaths
Standard and visual obturators
Examination and instrument bridges
Single-channel and double-channel bridges
Compatible biopsy and grasping forceps
Stone-removal accessories
Replacement stopcocks, seals and accessories

The product range and supplied components can differ by required system. Ask for a technical quotation based on the installed cystoscope rather than assuming that parts with the same nominal size are interchangeable.

Product Overview

What Are Cystoscopy Instruments?

Cystoscopy instruments are components used with a cystoscope to visualise the urethra and urinary bladder during an authorised diagnostic or operative procedure.

A typical rigid cystoscopy system combines:

A telescope for endoscopic visualisation
A compatible sheath with irrigation channel
A matching obturator for insertion
An examination or instrument bridge
Irrigation arrangement and stopcocks
Camera and light-transmission equipment

Where an operative bridge or working channel is provided, appropriately sized instruments may be introduced through the cystoscope assembly. The exact configuration should be selected by qualified clinical and biomedical personnel.

Clinical Notice & Procurement Guidance

Cystoscopy instruments must be matched as a complete system — not by French size alone. The telescope diameter, viewing angle, sheath locking mechanism, bridge interface, obturator profile and irrigation ports must all be verified together by qualified clinical and biomedical personnel before ordering.

System Components

Main Components of a Rigid Cystoscopy System

Component Function within the system Details to confirm
Rigid telescopeProvides endoscopic visualisationDiameter, working length, viewing angle and light-post type
Cystoscope sheathProvides the access and irrigation channelFrench size, telescope fit, flow design and lock
ObturatorFits the specified sheath during insertionSize, length, tip profile and locking interface
Examination bridgeConnects the telescope and sheath for examinationTelescope and sheath series
Instrument bridgeProvides access for compatible instrumentsNumber and size of channels
Stopcocks and portsConnect the approved irrigation systemPosition, thread and tubing connection
Mechanical instrumentProvides the authorised grasping or biopsy functionFrench size, working length and bridge compatibility
Light cableConnects the telescope to the light sourceLight-source and telescope-side connectors
Camera couplerConnects the telescope to the imaging systemEyepiece and camera-head compatibility
Specifications

Cystoscope Sheath with Obturator

A cystoscope sheath provides a protective access channel for a compatible telescope and associated instruments. The obturator must match the sheath's diameter, working length, tip profile and locking system.

Bharat Surgical currently publishes stainless-steel cystoscope sheaths with obturators in the following sizes:

15.3 Fr — approx. 5.1 mm
17 Fr — approx. 5.7 mm
19 Fr — approx. 6.3 mm
20 Fr — approx. 6.7 mm
21 Fr — approx. 7.0 mm
22 Fr — approx. 7.3 mm
25 Fr — approx. 8.3 mm

*Mathematical French-scale conversions only. Actual profiles, tolerances, connectors and usable internal spaces remain product-specific.

Understanding Cystoscope Sheath Sizes

French Scale Formula: Diameter in millimetres = French size ÷ 3

The appropriate sheath size is a clinical and system-selection decision. A larger French size does not automatically mean that a particular telescope, bridge or instrument will fit.

The published product specification identifies stainless steel grade 304. Confirm the required size, flow configuration, supplied accessories and telescope compatibility in the final quotation.

Product Comparison

Diagnostic and Operative Cystoscopy Configurations

Selection point Diagnostic configuration Operative configuration
Primary purposeEndoscopic examinationExamination with access for a compatible instrument
BridgeExamination bridge or model-specific connectorInstrument bridge with one or more channels
Working instrumentNormally not required for basic viewingCompatible biopsy, grasping or retrieval instrument
IrrigationModel-specific inflow arrangementModel-specific flow arrangement
Compatibility priorityTelescope, sheath and examination bridgeTelescope, sheath, bridge and working instrument

The words "diagnostic" and "operative" describe a system configuration, not merely the sheath. The final assembly may depend on the selected bridge and compatible accessories.

Product Details

Standard and Continuous-Flow Sheaths

Standard or Single-Flow Sheath

A standard configuration may provide a defined irrigation connection through which fluid enters or exits according to the system design.

Continuous-Flow Sheath

A continuous-flow configuration normally uses separate flow paths or inner and outer sheath components to support inflow and outflow. A standard sheath and a continuous-flow sheath are not necessarily interchangeable.

Buyers Must Confirm for Continuous-Flow
Inner and outer sheath sizes
Telescope diameter and angle
Locking mechanism
Compatible obturator
Port and stopcock arrangement
Bridge compatibility
Supplied seals and connectors
Product Details

Cystoscopy Bridges

The bridge joins the telescope, sheath and — where applicable — working instruments. Two bridges that appear similar may use different locks, seals or channel dimensions.

Bridge type Typical system role Procurement check
Examination bridgeSupports diagnostic viewing configurationTelescope and sheath interface
Single-channel instrument bridgeAllows one compatible working instrumentChannel size and instrument diameter
Double-channel instrument bridgeProvides two defined channelsChannel sizes, seals and instrument combination
Model-specific bridgeFits a particular system familyManufacturer and catalogue reference

Buyers should submit the exact existing reference whenever a replacement bridge is required.

Selection Guide

Telescope Compatibility

A cystoscope sheath must fit the telescope mechanically and function as part of the complete optical system. Confirm the following before ordering:

Telescope manufacturer
Exact catalogue or model number
Telescope diameter
Working length
Viewing angle
Eyepiece configuration
Light-post interface
Sheath locking geometry
Bridge interface

Do not assume that telescopes with the same diameter have the same length or connection.

Compatibility

Brand-Type and Cross-System Compatibility

Terms such as "Storz type" or another brand-type description may be used to explain the intended interface. Such wording does not prove universal compatibility and does not imply manufacture, authorisation or endorsement by the referenced brand owner.

Compatibility should be verified through:

Original Equipment References

Use original equipment catalogue numbers and dimensional or technical drawings — not brand-type descriptions alone.

Component Markings

Check existing component markings and submit clear photographs of all locking interfaces for review.

Physical Sample Matching

Where necessary, physical sample matching and biomedical inspection of the assembled system should be performed before clinical use.

Material & Construction Review

Evaluate external and internal surface finish, straightness, telescope-lock engagement, obturator fit, channel patency, stopcock movement and connector security.

All third-party trademarks remain the property of their respective owners.

Selection Guide

Selecting the Correct Cystoscopy Instruments

Before placing an order, confirm:

Diagnostic or operative system requirement
Adult or specialised configuration
Required French size
Standard or continuous-flow sheath
Telescope diameter and working length
Telescope viewing angle
Examination or instrument bridge requirement
Number and size of working channels
Obturator type
Required forceps or other accessories
Light-cable and camera compatibility
Reprocessing requirements
Required quantity and spare components
Tender and documentation requirements
Cleaning & Care

Inspection Before Use

Inspect each cystoscopy instrument before use and after reprocessing for:

Visible contamination or retained soil
Deformation or bent shaft
Blocked channels or outlets
Damaged or worn locks
Worn seals or gaskets
Loose or damaged connections
Corrosion or pitting
Burrs or unintended sharp edges
Damaged stopcock movement
Illegible product markings or traceability labels
Retained moisture in channels
Remove any damaged, incomplete or mismatched component from service.
Cleaning & Care

Cleaning and Reprocessing

Reprocessing Care Guidelines

Always follow the instructions supplied with the exact Bharat Surgical model. For narrow channels in cystoscopy instruments, the IFU should be followed for disassembly, brushing, flushing, rinsing and drying using validated cleaning agents and accessories. Effective cleaning must precede the applicable validated sterilisation or disinfection process.

Only use steam sterilisation when the applicable product IFU validates the exact cycle for that instrument. Do not copy sterilization parameters from another manufacturer.

Reprocessing Checklist
Follow the IFU supplied with the exact model.
Begin point-of-use treatment promptly.
Disassemble removable parts as directed.
Flush and brush the complete accessible channel.
Clean the external shaft, ports, stopcocks and locks.
Rinse away detergent residue thoroughly.
Dry the external surface and all channels completely.
Inspect for retained soil, blockage and damage.
Package and use the validated sterilization method.
Maintain processing traceability records.
Procurement

Example Cystoscopy Set BOQ

Component Suggested quantity
Compatible rigid telescope1
Cystoscope sheath1
Matching obturator1
Examination bridge1
Single- or double-channel instrument bridgeAs required
Compatible biopsy forcepsAs required
Compatible grasping forcepsAs required
Light cable1
Camera coupler1
Irrigation connectors and tubing accessories1 set
Cleaning accessories specified in the IFU1 set
Sterilisation tray or container1

This BOQ is a procurement template, not a procedural setup instruction. The final set should be approved by the facility's urology, biomedical engineering and sterile-services teams.

Selection Guide

Why Choose Bharat Surgical for Cystoscopy Instruments?

Multiple cystoscope sheath sizes (15.3 Fr to 25 Fr)
Sheaths available with matching obturator configurations
304-grade stainless-steel construction
Individual components and configured-set enquiries
Supply support for hospitals and urology centres
Dealer, distributor and export enquiries
Compatibility-based quotation assistance
Bulk and institutional procurement support
ISO 13485:2016 certified manufacturer
40+ years of surgical instrument manufacturing experience

All product claims, dimensions, materials, compatibility details, supplied components and reusable status must be verified against the final quotation and product-specific documentation.

Immediate Answers

Frequently Asked Questions

Technical, reprocessing, ordering and compatibility answers for the Bharat Surgical Cystoscopy Instruments range.

Cystoscopy instruments are components used with a cystoscope for authorised visual examination or operative access within the urethra and urinary bladder.

It may include a telescope, sheath, obturator, bridge, irrigation connections, light cable and compatible working instruments.

Bharat Surgical publishes stainless-steel cystoscope sheaths with obturators in multiple French sizes.

The currently published sizes are 15.3 Fr, 17 Fr, 19 Fr, 20 Fr, 21 Fr, 22 Fr and 25 Fr. Availability should be reconfirmed before ordering.

Fr means French size, a scale used to express the nominal outside diameter of tubular medical instruments.

Divide the French size by three to obtain the approximate nominal diameter in millimetres.

The mathematical French-scale conversion is 7 mm, but the manufacturer's dimensional drawing should be used for procurement and compatibility.

Not automatically. Internal dimensions, working length, locks and bridge interfaces must also match.

It is the component that houses a compatible telescope and provides the defined access and irrigation arrangement.

It is a component made to fit a particular sheath. Its size, length, profile and lock must match that sheath.

Bharat Surgical publishes a cystoscope sheath supplied with an obturator, but the exact package contents must be confirmed in the quotation.

Only when compatibility has been established for that exact sheath model. Matching French sizes alone does not prove compatibility.

It is a specialised obturator configuration designed to work with a compatible telescope and sheath. It is different from a standard obturator.

A bridge connects the telescope and sheath and may provide channels for compatible working instruments.

It is a bridge used in a diagnostic viewing configuration without assuming operative instrument access.

It is a bridge with one or more defined channels for appropriately sized cystoscopy instruments.

It provides two model-specific working channels. The dimensions, seals and approved instrument combination must be checked.

An operative configuration includes compatible access for working instruments, while a diagnostic arrangement is primarily configured for examination.

It is a sheath configuration designed with defined inflow and outflow paths. Its inner and outer components must match.

They are different configurations. Selection depends on the authorised application, existing system and clinician's requirements.

Bharat Surgical's published sheath is described as 304-grade stainless steel.

No. They are different stainless-steel grades. Use the material grade stated in the product-specific quotation and documentation.

Selected cystoscopy instruments may be reusable when cleaned and reprocessed according to the validated IFU.

Not necessarily. Supplied sterile status and packaging must be confirmed separately.

Only use steam sterilisation when the applicable product IFU validates the exact cycle for that instrument.

Follow the IFU for disassembly, brushing, flushing, rinsing and drying using validated cleaning agents and accessories.

Yes. Effective cleaning must precede the applicable validated sterilisation or disinfection process.

Check for deformation, blocked channels, damaged locks, worn seals, loose connections and other defects specified in the IFU.

Availability depends on the sheath model. Provide its catalogue number and photographs when requesting replacement parts.

No. Diameter, length, viewing angle and locking interface must be verified.

It describes an intended interface style. It does not guarantee compatibility with every model or imply OEM manufacture.

Yes, subject to confirming compatibility with the existing telescope, bridge and obturator.

Individual components may be quoted when the exact system and interface are identified.

A complete or configured set may be quoted after the telescope, sheath, bridge, instrument and imaging requirements are confirmed.

Price depends on size, configuration, included components, compatibility, quantity, documentation, packaging and destination.

Provide the manufacturer, model numbers, catalogue references, French sizes, telescope dimensions, viewing angle and clear interface photographs.

Dealer, distributor, importer and bulk institutional enquiries can be submitted with the required quantities and destination.

A compatible tray or container may be included in the quotation when requested and available.

Medical and Procurement Disclaimer: This page provides general product and procurement information for qualified healthcare organisations and medical-device buyers. It is not a clinical instruction and does not replace professional training, clinical judgement, institutional protocols or product-specific instructions for use. Compatibility, intended use, reprocessing, sterilisation, regulatory status and supplied condition must be verified before purchase and use.

Request Cystoscopy Instrument Price

Cystoscopy instrument pricing varies according to sheath size, configuration, included components, quantity, documentation and delivery destination. Contact Bharat Surgical with the required sheath size, telescope details, viewing angle, bridge type, obturator configuration, working instruments, quantity and delivery destination.
Factors Affecting Price: French size, standard or continuous-flow design, material and construction, obturator configuration, bridge type, number of working channels, included forceps or accessories, telescope compatibility, quantity, packaging, sterilisation tray, technical documentation, delivery destination

Request Quote Upload Photo or BOQ